Separation Claw / Bracket — The separation claw lifts the sheet off the drum or roller after transfer. Wrap-around jams and repeated sheet damage usually trace to a worn or broken claw.
This separation claw bracket holds the fuser separation claws that guide paper out of the fuser. It fixes paper jams, scratches on prints, and claw misalignment. Heat-resistant engineering plastic. Fits Fuji Xerox S1810/S2011/S2110/S2520 A3 MFPs.
For Fuji Xerox S1810 Separation Claw Bracket fits Fuji Xerox S1810, S2011, S2320, S2520 and 4 more listed below. Not suitable for: Wrap jams caused by a failed transfer or a worn drum surface. Match the part number to your machine before ordering.
Updated: 2026-09-26 · Technical review for separation claw / brackets
| Parameter | Value | Condition / method |
|---|---|---|
| Claw material | POM or spring steel to match OE | Material spec sheet |
| Bracket | OE-matched mounting geometry | Fitment check |
| Tip profile | Matched to OE — a wrong profile marks the sheet | Visual comparison |
| Compliance | RoHS / REACH | Supplier declaration per batch |
| Printer model | Status |
|---|---|
| Fuji Xerox S1810 | Verified fitment |
| S2011 | Verified fitment |
| S2320 | Verified fitment |
| S2520 | Verified fitment |
| S2110 | Verified fitment |
| S2010 | Verified fitment |
| S2220 | Verified fitment |
| S2420 | Verified fitment |
If your machine is not listed, send us the model and a photo of the original part — parts that look alike within the same family are frequently not interchangeable.
| Symptom | Mechanism |
|---|---|
| Paper wraps around the drum or roller | Claw tip is worn or broken |
| Repeated jam at the separation point | Claw is not lifting cleanly |
| Scratch marks along the sheet | Damaged claw tip is dragging |
Inspect the drum or roller surface before fitting — a damaged surface will destroy the new claw tip. Set the claw clearance to the service manual value.
Q: What is the MOQ?
A: 200 pcs per part number.
Q: Claw only or with the bracket?
A: Both are stocked where the model splits them. Order the bracket too if the mounting is cracked.
Send your enquiry — quote within 12 hours
Check the drum or roller surface. A scored surface catches the sheet regardless of the claw condition, and the new claw will wear quickly against it.
Yes. We ship by sea, air and express to North America, Europe, South America, the Middle East and South-East Asia, and we handle export documentation. Send the destination port or airport and the quantity, and we will quote FOB, CIF or DDP as you prefer.
Parts are warranted against manufacturing defects and are bench-tested on the host machine type before packing. Fitment-related claims need the part reported before installation. Send us the part number and quantity and we will state the exact term for that item in writing.
Stock items ship in 15–30 days; new tooling takes 30–45 days. We ship by sea, air and express under FOB, CIF or DDP Incoterms, and payment is T/T or L/C at sight. Give us the destination port and quantity for a firm schedule.
Yes. Custom logo, printed polybag, blister or retail box are all available, and we can tool new compounds or geometries from a drawing or sample. Minimum quantities for custom work are higher than for stock parts — send the specification and we will quote both.
Browse the full printer spare parts catalog, or see how we manufacture and test.
Bulk & Mixed Batch · Reply within 12h
