Paper Guide / Path Plate — This plate or guide keeps the sheet aligned through the path. A bent or cracked guide causes repeated jams at the same point in the path.
This fuser cover and paper guide plate directs paper smoothly through the exit path. It fixes exit jams, paper curling, and mis-delivery. Heat-resistant material designed for fuser-area use. Fits Fuji Xerox S1810/S2011/S2110 series.
For Fuji Xerox S2011 Fuser Paper Guide Plate / Exit Guide fits Fuji Xerox S2011, S2110nda, S1810, S2320 and 4 more listed below. Not suitable for: Jams caused by worn feed rollers — inspect the rubber before replacing the guide. Match the part number to your machine before ordering.
Updated: 2026-09-26 · Technical review for paper guide / path plates
| Parameter | Value | Condition / method |
|---|---|---|
| Material | ABS, PC or stainless steel to match OE | Material spec sheet |
| Geometry | OE-matched mounting points | Fitment check |
| Surface | Free of burrs on the paper-contact face | Visual and tactile check |
| Compliance | RoHS / REACH | Supplier declaration per batch |
| Printer model | Status |
|---|---|
| Fuji Xerox S2011 | Verified fitment |
| S2110nda | Verified fitment |
| S1810 | Verified fitment |
| S2320 | Verified fitment |
| S2520 | Verified fitment |
| S2420 | Verified fitment |
| S2220 | Verified fitment |
| S2010 | Verified fitment |
If your machine is not listed, send us the model and a photo of the original part — parts that look alike within the same family are frequently not interchangeable.
| Symptom | Mechanism |
|---|---|
| Jams recurring at the same point | Guide is bent or a tab is broken |
| Sheet edge damage or curl | Burr on the guide face |
| Visible crack on a mounting tab | Guide will not hold alignment |
Check the rollers before fitting — a worn roller jams in the same place as a bent guide. Seat the guide fully; a guide left proud by a millimetre will catch the sheet edge.
Q: What is the MOQ?
A: 200 pcs per part number.
Q: Do you stock the metal version?
A: Where the model specifies steel, yes. Confirm the part number before ordering.
Send your enquiry — quote within 12 hours
Often, yes. A jam recurring at exactly the same point can be either. Inspect the guide for a burr or crack first because it is free to check, then look at the roller rubber.
Yes. We ship by sea, air and express to North America, Europe, South America, the Middle East and South-East Asia, and we handle export documentation. Send the destination port or airport and the quantity, and we will quote FOB, CIF or DDP as you prefer.
Parts are warranted against manufacturing defects and are bench-tested on the host machine type before packing. Fitment-related claims need the part reported before installation. Send us the part number and quantity and we will state the exact term for that item in writing.
Stock items ship in 15–30 days; new tooling takes 30–45 days. We ship by sea, air and express under FOB, CIF or DDP Incoterms, and payment is T/T or L/C at sight. Give us the destination port and quantity for a firm schedule.
Yes. Custom logo, printed polybag, blister or retail box are all available, and we can tool new compounds or geometries from a drawing or sample. Minimum quantities for custom work are higher than for stock parts — send the specification and we will quote both.
Browse the full printer spare parts catalog, or see how we manufacture and test.
Bulk & Mixed Batch · Reply within 12h
