Separation Pad — A separation pad holds the sheet stack back so only the top sheet advances. It is the counter-part to the pickup roller — replace both together, or the misfeed returns within weeks.
This pickup roller and separation pad kit restores reliable paper feeding from the cassette. It solves misfeed, multi-feed and paper jam issues on compatible Lenovo MFPs.
For Lenovo M7216 Pickup Roller + Separation Pad fits Lenovo M7216NWA, M7206W, M7255F, M7256WHF. Not suitable for: Continuous feeding of coated or textured media — specify a higher-friction compound instead. Match the part number to your machine before ordering.
Updated: 2026-09-26 · Technical review for separation pads
| Parameter | Value | Condition / method |
|---|---|---|
| Facing material | Cork-rubber composite or textured PU | Visual and friction check |
| Static friction coefficient | Higher than the sheet-to-sheet coefficient by design | Comparative feed test on 75 gsm |
| Service life | Typically 50,000–100,000 sheets | 75 gsm plain paper, 23 °C / 50 % RH |
| Compression set | Pad returns to thickness after load removal | Visual inspection at service interval |
| Compliance | RoHS / REACH | Supplier declaration per batch |
| Printer model | Status |
|---|---|
| Lenovo M7216NWA | Verified fitment |
| M7206W | Verified fitment |
| M7255F | Verified fitment |
| M7256WHF | Verified fitment |
If your machine is not listed, send us the model and a photo of the original part — parts that look alike within the same family are frequently not interchangeable.
| Symptom | Mechanism |
|---|---|
| Two or more sheets feed together | Pad friction has dropped below the sheet-to-sheet value |
| Frequent 'paper jam' at the feed inlet | Worn pad lets the stack creep forward |
| Visible glazing or a smooth polished patch | Facing layer is worn through |
| Misfeed returns shortly after fitting a new pickup roller | The pad was not replaced with it |
Unclip the pad holder, lift the old pad out, and seat the new one flat against the holder. A pad fitted crooked will feed skew. Clean the holder face before fitting.
Q: What is the MOQ?
A: 1,000 pcs per model. Mixed models accepted from 2,000 pcs total.
Q: Do you sell it as a kit with the pickup roller?
A: Yes — a roller and pad kit is the most common order, and it avoids the comeback caused by replacing only one part.
Q: Can I get my own packaging?
A: Yes. Printed polybag or blister with your artwork, from 2,000 pcs.
Send your enquiry — quote within 12 hours
Sometimes. Light dust and paper debris wipe off and friction recovers. Once the facing glazes or the cork layer compresses permanently, no amount of cleaning brings the coefficient back. If the machine has already passed roughly 80,000 sheets, fit a new pad.
Usually because the pickup roller was not renewed with it. The old roller no longer lifts cleanly, so the new pad fights an inconsistent feed. Fit both and the symptom disappears.
Yes. We ship by sea, air and express to North America, Europe, South America, the Middle East and South-East Asia, and we handle export documentation. Send the destination port or airport and the quantity, and we will quote FOB, CIF or DDP as you prefer.
Parts are warranted against manufacturing defects and are bench-tested on the host machine type before packing. Fitment-related claims need the part reported before installation. Send us the part number and quantity and we will state the exact term for that item in writing.
Stock items ship in 15–30 days; new tooling takes 30–45 days. We ship by sea, air and express under FOB, CIF or DDP Incoterms, and payment is T/T or L/C at sight. Give us the destination port and quantity for a firm schedule.
Yes. Custom logo, printed polybag, blister or retail box are all available, and we can tool new compounds or geometries from a drawing or sample. Minimum quantities for custom work are higher than for stock parts — send the specification and we will quote both.
Browse the full printer spare parts catalog, or see how we manufacture and test.
Bulk & Mixed Batch · Reply within 12h
